CJade Posted September 10, 2021 Share Posted September 10, 2021 4 hours ago, Cupidstar said: Bug Summary: Game still freezes when opening screenshots Reproduction steps: 1. Take 1000 or so screenshots (the more, the longer it freezes) 2. On F2, click on "Take a Character Portrait" or press ESC > Photo Gallery 3. The game will freeze (seems to be 1 minute per 1000 screenshots) Additional information: My guess is that the game is trying to load all thumbnails in the folder at the same time, which is really really bad. Or it is wasting all it's time trying to sort the list of names, which shouldn't be the case. Very old issue, not really UE4 thing. You fix it by putting that whole folder in exclusion. Like you said it scans the whole friggin folder, really dumb. Or you can make another folder and put the screenshots there until the bns folder fills up again. Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 (edited) Screenshots no longer save with the current date and time, but with a number: Saving with the correct date and time allows organizing the screenshots and avoids the freezing issue existing from UE3, which I've reported before. This is refering to this issue: https://forums.bladeandsoul.com/topic/252194-report-ue4-bugs-here/?do=findComment&comment=2095560 Edited September 10, 2021 by Cupidstar Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Tooltips do not have a background and/or border: The "Divide" can blend super easily with other contents around, for example. Link to comment Share on other sites More sharing options...
Kanghwan Posted September 10, 2021 Share Posted September 10, 2021 I'm skeptical if "full screen" or "windowed full screen" honour the resolution selection. If I run it at 1920x1080 "fullscreen" or "windowed full screen", it is clearly just running at the native monitor resolution (3840x2160). The FPS drops to 15-25, (I have all the graphics sliders set to maximum) and when I took a screenshot it was 3840x2160. Turning on the "performance mode" gets the FPS into the 40s-50s. If I run the game in a 1920x1080 window, it's showing high 50s to pegging the 60fps vsync cap. But it only takes up a quarter of the screen then, so it's unplayable. I'm using a Ryzen 3900X with a GTX1080 with nVidia drivers v466.47. That should be sufficient hardware for all the eye candy at 1080p. Another possibly confounding factor: I have a dual monitor setup (two 3840x2160 screens). Usually when I start a game on one screen that drops the resolution (working example: Guild Wars 2), there's a "jank" moment where icons or other windows get shunted around and tossed on the other screen. This doesn't happen with BnS, which seems another hint that it's not adjusting the resolution. 1 Link to comment Share on other sites More sharing options...
NightHunter37 Posted September 10, 2021 Share Posted September 10, 2021 Hi, I'm having problems trying to launch the game after the new engine download. Once I click Start Game at the NcLauncher 2, an error message pops up in korean. I can't read korean. I've uninstalled and reinstalled the game and launcher twice. Still the same problem. Please help! Thank You. Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: Sometimes, receiving mail causes some issues showing the background color of some items Reproduction steps: 1. Open the mail 2. Look at the items 3. Sometimes, they have the wrong background Attachment: Additional information: I spent HMCoins just to show this bug. You can see the "Venture Token" and the "Reaver Support Package" backgrounds change if an item goes into the mailbox Link to comment Share on other sites More sharing options...
Kvintus Posted September 10, 2021 Share Posted September 10, 2021 16 minutes ago, Kanghwan said: I'm skeptical if "full screen" or "windowed full screen" honour the resolution selection. If I run it at 1920x1080 "fullscreen" or "windowed full screen", it is clearly just running at the native monitor resolution (3840x2160). The FPS drops to 15-25, (I have all the graphics sliders set to maximum) and when I took a screenshot it was 3840x2160. Turning on the "performance mode" gets the FPS into the 40s-50s. If I run the game in a 1920x1080 window, it's showing high 50s to pegging the 60fps vsync cap. But it only takes up a quarter of the screen then, so it's unplayable. I'm using a Ryzen 3900X with a GTX1080 with nVidia drivers v466.47. That should be sufficient hardware for all the eye candy at 1080p. Another possibly confounding factor: I have a dual monitor setup (two 3840x2160 screens). Usually when I start a game on one screen that drops the resolution (working example: Guild Wars 2), there's a "jank" moment where icons or other windows get shunted around and tossed on the other screen. This doesn't happen with BnS, which seems another hint that it's not adjusting the resolution. This is exactly my problem, just different native resolutions. The game doesn't actually change the resolution when you change it in the menu, it just changes the size of the window (if you are windowed, otherwise nothing happens). 1 Link to comment Share on other sites More sharing options...
BruiseLeen Posted September 10, 2021 Share Posted September 10, 2021 How to onyx scale plz? I'd like to farm to upgrade pet. I don't want to do Yunsang again. Please. UE4 fix this. V/R Rickie :) Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: Cursor can click on things it shouldn't Reproduction steps: 1. Get ingame and walk 2. Change song on Spotify or open a floating video window 3. Pass the mouse over the floating window Attachment: Additional information: This exists since UE3, but was expecting this to be fixed on this version, since it is something incredibly basic. The expectation is that the mouse is moved to the center of the display after reading how much and where it moved to. Link to comment Share on other sites More sharing options...
chilegamerz Posted September 10, 2021 Share Posted September 10, 2021 more mistakes really! The warlock just came out and they have already begun to modify his skill and not for the better, he wants the same thing to happen as with the other warlock that after so many modifications was no longer useful at all. They doubled the cooldown of abilities is too much. the other now the game is disconnected and after years playing with ue3 it never happened to me, please check that. the other the pj takes a long time to throw the skills is as slowed down 1 Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: Skills don't show in F anymore, in simple mode Reproduction steps: 1. Enable simple mode 2. Get in a fight 3. No skills will show in the F prompt Attachment: The place where the F key is: Additional information: I'm not sure if this happens in other modes, but I can confirm it happens in simple mode. This basically makes it so I can't use my 2nd stun. Considering how players seem to be alergic to CC, effectively removing 1 stun makes it easy to fail the mechanics in some dungeons/raids/weeklies. Link to comment Share on other sites More sharing options...
LEaNLEoN93 Posted September 10, 2021 Share Posted September 10, 2021 (edited) On 9/9/2021 at 2:56 AM, Azzuray said: Bug Summary: since BD got his "Wind Slash removed and replaced with Hurricane Slash , it doesnt actualise on IA Amulet ... Reproduction steps: Go on merchant and try to change ... Attachment: Additional: BD Wind To add to this one. Unity stones have the same issue. So Wind/Spinning Storm Bladedancer gets no skill point from these high tier items. Edited September 10, 2021 by LEaNLEoN93 Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 The HP bar on the 2nd party, in an alliance, is bugged: Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: Rod doesn't animate in Windrest Reproduction steps: 1. Go to Windrest 2. Get the "Catch of the Day" quest 3. Press F to activate the rod 4. The rod is completely static Attachment: (please ignore the weird aspect ratio) Additional information: The fishing rod was animated in UE3. It would move up and down, with the "weight" of whatever it fished. Link to comment Share on other sites More sharing options...
Sooya Posted September 10, 2021 Share Posted September 10, 2021 [Warlock Bug] Bug Summary: Time Distortion stops working upon 2nd use Reproduction steps: 1. Begin fight, activate Time Distortion and get skill cooldown resets. 2. After 2m6s, Time Distortion is off cooldown on both the skills hotbar and skill cooldown status bar. 3. Activate Time Distortion again. 4. The animations/visuals for an active TD show as usual, however, it doesn't actually reset any cooldowns anymore. Additional information: Class: WL, Way of the Reaver, bottom row talent #2 (Borrowed Time) [Dual Blade Bug] Bug Summary: Certain equipment chests cannot be opened on Dual Blade. Reproduction steps: 1. Obtain Skybreak Accesory boxes from Call to Arms Budle in f10. 2. Sent over a Mastercraft Awakened Celestial Emperor Ring Chest - Stage 3, and Mastercraft Awakened Stormsiege Bracelet Chest - Stage 3. 3. Right click to open the boxes. 4. Receive System message: Invalid Item.Attachment: Additional information: Personally tried to open a Celestial Emperor Ring, Stormsiege bracelet, and the Skybreak Spire Ring box, all of which do not work but I'm certain this is not only limited to these specific gear boxes. Link to comment Share on other sites More sharing options...
massiveStorms Posted September 10, 2021 Share Posted September 10, 2021 (edited) PVP-Arena is still slowing down after some matches. It feels like the fps are dropping more and more. As a coder myself this reminds me of loops that are not terminated correctly and accumulate more and more. My specs are Ryzen 5600x / 6600 XT / 32 GB RAM Edited September 10, 2021 by massiveStorms Link to comment Share on other sites More sharing options...
massiveStorms Posted September 10, 2021 Share Posted September 10, 2021 The orientation is bugged in 6vs6, when you die on the field and look around holding camera control. When you respawn the camera orientation is still at the point where you left it while you were dead. That's an issue we already had in UE3. Link to comment Share on other sites More sharing options...
massiveStorms Posted September 10, 2021 Share Posted September 10, 2021 When I use Q and E on the WL and quick turn and SS, the SS will go in the wrong direction. It looks like the fast turn is not being registered. Link to comment Share on other sites More sharing options...
massiveStorms Posted September 10, 2021 Share Posted September 10, 2021 The launcher is switching to North America for no reason. So I always have to watch the region before I click "Start game". Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: The cutscene (black) screen shows for too long Reproduction steps: 1. Go somewhere that triggers cutscenes 2. Press ESC 3. The screen will be black for a few seconds Additional information: This sometimes causes the mouse to get stuck 1 Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: Skybreak Spyre - Moyun and Shun's floor has no effects Reproduction steps: 1. Go to Skybreak Spyre 2. Fight Moyun and Shun 3. The floor will look normal, but you take damage and die imediately Additional information: My Settings: Link to comment Share on other sites More sharing options...
Cupidstar Posted September 10, 2021 Share Posted September 10, 2021 Bug Summary: Some windows don't close when you press ESC when the textbox is selected Reproduction steps: 1. Open a window. E.g.: F5 2. Click on "Please search for items" 3. Press ESC Additional information: It seems that the windows that don't respond to ESC are webpages with Awesomium. F2 and F5 are implemented as webpages, and both suffer this bug. Link to comment Share on other sites More sharing options...
BloodHorn Posted September 10, 2021 Share Posted September 10, 2021 12 hours ago, voldar said: Bug Summary update: Changing any setting, will cause fps to plummet. I have found that changing my settings caused the game's default audio output to select my VR headset (which is not connected most of the time). After I finally managed to log in, I managed to change the audio output device to my speakers and the game runs perfectly well again. FPS with Oculus virtual audio device selected: FPS with any other audio device selected: Yep that exactly what i found, when i see side to side old xml + new xml after apply on setting ingame, i saw that it apply oculus quest 2 by default, and when disabling it in windows sound manager, it's gone. I don't know how it take this device by default but anyway, that's a fix. I'm just wanted to share this fix, and i see your notification. Nice job! Link to comment Share on other sites More sharing options...
YakumoRei Posted September 10, 2021 Share Posted September 10, 2021 Hello. Since switched to UE4, I will encounter "Failed to connect server. SystemErr (picture link)" every day when playing the game. If successfully logging in to the game is equal to God’s blessing, and I often fail to board at all. This was not the case in UE3 before. Thank you Link to comment Share on other sites More sharing options...
Lenoxis Posted September 10, 2021 Share Posted September 10, 2021 1 Link to comment Share on other sites More sharing options...
Recommended Posts